Showers
Results: 129
36 Inch Ada Transfer Shower ( Model Xst 4036 Bf. 5)
The 36 inch Transfer Shower, model XST 4036 BF. 5, is a one-piece gel-coat transfer shower designed for individuals with lower extremity disabilities. A 90-degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four-inch tile finish, a textured slip resistant floor, a leg ledge and soap/shampoo ledges. The half-in
36 Inch Ada Transfer Shower (Model Xst 3699 Bf .5)
The 36 inch Transfer Shower, model is a one piece gel-coat shower with built-in grab bar and seat, model XST 3699 BF .5, designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a four- inch tile finish, a textured slip resistant floor, and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. The included handshowerkit has nyl
36 Inch Ada Transfer Shower (Model Xst 3938 Bf. 5)
The 36 inch Transfer Shower, model XST 3938 BF. 5, is a one-piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. A 90- degree self-trimming dry wall flange maximizes wheelchair turning radius, allowing closer and safer wheelchair-to-seat transfers. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip-resis
36 Inch Ada Transfer Shower (Xst 3838 Bf 1.25)
The 36 inch Transfer Shower, model XST 3838 BF 1.25, is a one- piece gel-coat transfer shower with built-in grab bar and seat designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, leg ledges and soap/shampoo ledges. The half- inch tri-cell wall construction creates exceptional structural strength. Th
60 Inch Curbless Shower (Sxt6333 Bf .75)
The 60 inch Curbless Transfer Shower, model SXT6333 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a two-inch apron and a four- inch tile finish with diamond accents, a textured slip resistant floor, seat-height storage ledges, and soap/shampoo ledges. The half- inch tri-cell wall constructi
60 Inch Curbless Shower (Sxt6337 Bf1.25)
The 60 inch Curbless Transfer Shower, model SXT6337 BF1.25, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model has a 1.25-inch steel reinforced threshold, a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wall constructio
60 Inch Curbless Shower (Sxt6437 Bf .75)
The 60 inch Curbless Transfer Shower, model SXT6437 BF .75, is a one piece gel-coat transfer shower with built-in seat and grab bars designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars and seat. This model offers a three-quarter-inch steel reinforced threshold, a six- inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wal
A.b.e. End Drain Wheelchair Access Shower Pan (Model Bf-6030)
The A.B.E. End Drain Wheel Chair Access Shower Pan, model BF-6030, is a wheelchair accessible shower pan designed for use in building roll-in showers. The pan is made in a single, molded piece with a slip-resistant floor, an integral molded drain, a single threshold, and a flange on three sides. The pan is available with either a left or right drain. OPTIONS: 12 x 60 inch access ramp, model BF-1260; flexible threshhold, model BF-FT. DIMENSIONS (LxW): 30 x 60 inches. The drain is 2 inches in diam
Accessabath Bath Safety System (Models Ab603072Sa And Ab603072Sa-Wc)
The AccessaBath Bath Safety System, models AB603072SA and AB603072SA-WC, is a roll-in shower with a seat and grab bars designed for use by individuals who use wheelchairs and individuals with balance or mobility disabilities. System components include one wheelchair accessible shower pan (models FBF-3060L or FBF-3060R) or retro-fit shower pan (models FBF-3260L or FBF-3260R); one barrier free ramp (model BF1260); one flexible threshhold (model BF-FT); one folding-L transfer seat (model HS 553N) o
Acrylic Special Care Unit (Model Sc4286)
Shower bathtub of reinforced fiberglass with right or left access. Cellular inner core with reinforced polyester outer protective coating for overall rigidity. Dimensions: 41 inches wide by 38 inches deep by 84 inches high outside dimensions. Weighs approximately 185 pounds. Vinyl shower curtain. 28 inch by 18 inch L shaped grab bar mounts on valve wall and backwall 34 inches above bottom of shower. 24 inch straight grab bar mounts vertically on valve wall with bottom 36 inches from floor. Textu
Acrylic Special Care Unit (Models Sc4983 & Sc4983)
Shower with built in grab bar with right or left access. Outside dimensions: 48 inches wide by 34 inches deep by 84 inches high. Door measures 76 1/2 inches by 38 inches. Weighs approximately 195 pounds. Options: custom grab bars and dome light. Above floor rough in. Fabricated of molded reinforced fiberglass. 2 stainles steel grab bars in unit: 18 inch by 23 inch L shaped wrap aound grab bar mounted on back wall of valve wall 36 inches above bottom of shower; 24 inch straight grab bar mounted v
Acrylic Special Unit (Model Sc6183)
Shower bathtub with right or left side access. Outside dimensions: 60 inches wide by 34 inches deep by 84 inches high. Weight approximately 225 pounds. Removable teakwood seat. Fabricated of molded reinforced fiberglass. Includes 5 grab bars. Two 42 inch straight grab bars mount horizontally on back wall at 24 and 36 inches from floor. One 24 inch straight grab bar mounts vertically on valve wall with bottom 41 inches from floor. 16 inch straight grab bar mounts horizontally on valve wall 36 inc
Ada Adaptable Roll-In Shower (Model 62060103)
The ADA Adaptable Roll-in Shower, model 62060103, is a modular roll-in shower designed to provide shower access for wheelchair users. Made from solid Vikrell material, its modular design allows it to be moved around corners and through doorways. Components include an End Wall Set (model 62065103), Receptor (model 62061100), and Back Wall (model 62062103), which snap together with tongue-and-groove installation. Features include a lightly textured swirl-gloss finish, a low profile threshold for w
Ada Adaptable Transfer Shower (Model 62050115)
The ADA Adaptable Transfer Shower, model 62050115, is an accessible modular shower stall designed for use by individuals in wheelchairs. Made of solid Vikrell, this four-piece shower stall can be moved around corners and through doorways, and be fit back together with tongue-and-groove connections. Components include a Receptor (model 62051100), End Wall Set (model 62055115), and Back Wall (model 62052113). The stall has a low-profile threshold for wheelchair access; structurally reinforced fact
Ada Transfer Shower Stall (Model C4136Bffus)
The ADA Transfer Shower Stall, model C4136BFFUS, is an accessible shower stall designed for use by individuals with mobility disabilities. The enclosure is molded from a single sheet of Lucite cast acrylic with no joints or seams, and with a trench drain system that directs water to the center drain, which is brass with a stainless steel strainer. A fold-up seat allows transfers from wheelchair to shower. Factory installed accessories include one wrap-around grab bar and one straight grab bar mo
Ajusta Shower.
Adjustable shower head which can be moved vertically and horizontally by sliding the nozzle on a vertical shaft. Installation can be done easily and may be installed in most showers. Solid brass. Colors available.
Assist Suction Tub Bar
The Assist Suction Tub Bar is a bathtub grab bar designed for use by individuals with balance or lower extremity disabilities. This grab bar attaches to the bathtub edge or shower wall with two suction cups, which are locked in place by lowering a switch located on the grab bar. Flipping the switch up releases the cups so the grab bar can be removed or repositioned. The grab bar is made of ABS plastic and rubber. DIMENSIONS: 11 inches long with suction cups 3.75 inches in diameter or 16 inches l
Barrier Free Shower (Model 3Lrs4848B22B)
The Barrier Free Shower, model 3LRS4848B22B, is an accessible shower stall designed for wheelchair users. This three-piece shower stall is made of plywood-backed fiberglass, and has two walls and a center-drain shower pan with a low threshold. The stall has a polyester gelcoat smooth tile finish. OPTIONS: Shower valve; glide bar/hand shower; seat; grab bars; collapsible water stopper; drain; curtain and rod; amd tile accents. DIMENSIONS (HxDxW): 79 x 49 x 49 inches. Threshold curb height is 2.25
Barrier Free Shower Floor Ramp (Model Bf-1260)
The Barrier Free Shower Floor Ramp, model BF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The unit coordinates with Swanstone shower and bath systems. This ramp has a slip-resistant surface, and on its reinforced solid surface, color and texture run all the way through and cannot wear away. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Available in 37 different colors.
Barrier Free Shower Floor Ramp (Model Fbf-1260)
The Barrier Free Shower Floor Ramp, model FBF-1260, is a shower ramp designed to make a shower accessible to a wheelchair. The ramp is made of Veritek, and it can be installed without grout. This unit coordinates with the Swanstone shower and bath systems. DIMENSIONS (DxW): 12 x 60 inches. COLOR: Bisque, bone, or white.
Barrier Free Shower Pan
The Barrier Free Shower Pan is a wheelchair accessible shower pan designed for use in building roll in showers. It comes with an integrated drain on the left, right, or center; splash walls; and a barrier-free and/or Americans with Disabilities Act (ADA) compliant entrance. The leak-proof shower pan surface accepts tile directly without liners, mudding, or hot mopping. The pan comes with a round, polished adjustable drain plate. OPTIONS: Square drain plate. DIMENSIONS (DxW): With center drain, 3
Barrier Free Water Dam
The Barrier Free Water Dam is a water dam for showers designed to provide access to a roll-in shower by wheelchair and rolling shower chairs users while containing water. The soft vinyl dam is flexible for wheelchairs to roll over and then return to an upright position. It can be used in conjunction with a shower curtain to keep water in the shower area. The vinyl dam, made of poly-vinyl chloride, fits into an anodized and polished aluminum threshold. Installation requires a hack saw, measu
Barrier-Free Shower Floor With Entry Ramp (Model 360)
The Barrier-Free Shower Floor with Entry Ramp is a roll-in shower designed for use by individuals who use wheelchairs or walkers. The curbless floor and entry-ramp system can replace an existing bathtub, is designed for wheelchair access and is slip-resistant. Its offset drain placement (similar to that of a bathtub)in right- or left-hand configutation provides convenient installation or retrofit. The floor is made of molded fiberglass with resistance to mold, mildew and stains and a semigloss
Bath In Bed (Model Bb-1) & Portable Bath In Bed (Model Pbb-1)
The Portable Bath in Bed, model PBB-1, is a bed shower designed for use by individuals with mobility or severe physical disabilities. This system consists of a soft, flexible under liner surrounded by a lightweight, collapsible aluminum frame that supports the liner to create a bathtub; a shower unit with an electric pump to dispense water with the capacity to provide one continuous 10.5-minute shower; a flexible hose that connects to the under liner and the included waste water collection bottl
Bath Replacement Shower (Model Xst 6030 Bfkd 1)
The Bath Replacement Shower, model XST 6030 BFKD 1, is a curbless four-piece gel-coat roll-in shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The unit fits the footprint of most existing tub/sho
Bath Replacement Shower (Model Xst 6030 Shkd 4)
The Bath Replacement Shower, model XST 6030 SHKD 4, is a four- piece gel-coat shower with built-in grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. This four-piece sectional shower replaces a standard tub for renovation projects with limited interior space and the need to fit into existing footprint and plumbing configurations. The standard left or right drain location eliminates the need to relocate the
Bath Tub Shower Chair With Suction Cups
The Bath Tub Shower Chair With Suction Cups is designed for use by individuals with balance or mobility disabilities. The shower chair is made of furniture-grade tubular PVC plastic with a vinyl-coated polyester mesh seat. It is designed for use in the bathtub or shower with suction cups for attaching to the floor of the tub.
Bathcrest Walk-Thru Insert
The Bathcrest Walk-Thru Insert is a bathtub insert designed for use by individuals with arthritis or balance, lower extremity, or mobility disabilities. This insert, which fits most bathtubs, lowers the barrier to bathtub entry and converts the bathtub into a walk-through shower with an entranceway close to the height of normal steps.
Bathease
The Bathease is a walk in bathtub and shower unit with a 24 inch water tight door built into front of tub. The tub is made of fiberglass. DIMENSIONS (WxDxH): Standard dimensions are 60 x 30.5 x 22.25 inches; other sizes available. COLOR: Available.
Belmont Pu Corner Shower Stool (Model 124)
The Belmont PU Corner Shower Stool, model 124, is an adjustable shower stool designed for us by individuals with mobility or balance disabilities. This stool has a plastic coated tubular steel frame and a polyurethane molded padded seat. It is designed to fit into the corner of a shower, allowing full access to the caretaker. It has four rubber tip legs. DIMENSIONS: The seat height adjusts from 20 to 24 inches, the seat width is 16 inches, and the seat depth is 13.125 inches. The footprint is 1
Big John Hygienic Sprayer Hand Held Bidet
The John Hygienic Sprayer Hand Held Bidet is designed for users with mobility disabilities. The device provides comfort especially for personal hygiene and pregnancy and postpartum hygiene. It has a cleaning power at the touch of a button. This hand held bidet has a chrome finish.
Bringhurst Corner Shower Stool (Model 128)
The Bringhurst Corner Shower Stool, model 128, is a height adjustable shower stool designed for use by individuals with mobility disabilities. This plastic-coated shower stool with draining slats is designed to fit in the corner of the shower base. The seat is removable for ease of cleaning. The seat includes non-marring rubber tips. DIMENSIONS (HxWxH) 15 x 22.5 x 19.5 x 25.5 inches. CAPACITY: 279 pounds. WEIGHT: 13 pounds. COLOR: White
Buckingham Showereasy
The Buckingham Showereasy is a shower aid designed for use by individuals with upper extremity and severe physical disabilities. The showereasy is a shower arm device that complements the use of bath and shower boards, allowing hands-free showering and washing by the user. In use, the shower arm can be moved into three different directions, either directly upright or with a gentle push it can be moved to the left or right until it clicks into a particular position.
Cardinal Health Shower Chair without Back
Cardinal Health Shower Chair without Back is a shower aid device designed for individuals with limited mobility, arthritis, or leg amputations. Anodized aluminum frame with non-marring, slip-resistant rubber tips and multiple handholds make this bath seat a safe solution for showering. Seat constructed of high-density plastic with drainage holes. Tool-free assembly with all hardware and detailed instructions included.
Child's Standing Frame For Shower
CUSTOM ADAPTATIONPURPOSE: To enable a child with spina bifida to stand in the shower. The standing frame is square-shaped with one end open. The child supports herself on the sides or the closed end of the frame. The frame is constructed of one-inch PVC tubing with rubber suction cups on the bottom of each of the four legs. There is additional bracing across the top of the closed side. DIMENSIONS: The frame's approximate height is 65 centimeters (cm). TITLE: Sara Walks! JOURNAL: TAD Journal. REF
Collapsible Dam (Models Cwr-42, Cwr-54, Cwr-66 & Cwr-96)
The Collapsible Dam, models CWR-42, CWR-54, CWR-66 and CWR-96, is a water dam for a shower designed to control water spillage from all types of barrier-free, curbless showers. This device collapses easily by foot or wheelchair pressure and features a strong self-adhesive, water-resistant tape bottom. SIZES: 42 inches (for 36-inch opening); 54 inches (for 48-inch opening); 66 inches (for 60-inch opening); 96 inches (for 90-inch opening). OPTIONS: End caps for showers with radius end walls are ava
Combination Sink And Shower Unit.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: To make an accessible bathroom facility for a quadriplegic in an affordable manner with a simple efficient low cost facility which combines the sink and shower in a single unit. Cabinet is made of lightweight sink and drainage system that can easily be removed to free the entire shower area for bathing. Shower is accessible on a roll-in track. Rolling pulley lift is fitted to a 10 foot 4 inches wide steel I beam that attaches to ceiling. SKILLS REQUIRE
Corner Shower Seat (Model 0010)
Folding corner shower seat made of 16 gauge stainless steel polished to a satin finish. Bracket for wall mounting, Heavy duty stainless steel piano hinge. Overall size: 15 1/2 by 15 1/2 inches by 3/4 inch. Folds up against the wall.
Corner Shower Seat (Model F727120000)
The Corner Shower Seat, model F727120000, is a corner shower seat designed for use by individuals with balance or mobility disabilities. This shower chair fits into the corner of a stall requiring minimal space. It has a built-in front compartment that can be used to hold soap and a wash cloth. The chair is durable, rust proof, and easy to clean. DIMENSIONS (HxDxW): 16.5 x17 x 23 inches. The seat’s back height is 5.75 inches and the base is 24 inches. CAPACITY: 300 pounds. WEIGHT: 15 pounds. COL
Easy Living 48 Inch Shower (Model Xst4836 Bf .5 Curbless)
The Easy Living 48 Inch Shower, model XST4836 BF .5 CURBLESS, is a one piece gel-coat 48 inch curbless roll-in shower with bult-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a six-inch tile finish with diamond accents, a textured slip resistant floor, a leg ledge, and soap/shampoo ledges. The half- inch tri-cell wa
Easy Living 48 Inch Shower (Model Xst4836 Sh 4.0 Low Threshold)
The Easy Living 48 Inch Shower, model XST 4836 SH 4.0 LOW THRESHOLD, is a one-piece gel-coat shower with built-in grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model offers a low, step-over four-inch dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, a leg ledge, and soap/shampoo ledges. The half-inc
Easy Living 48 Inch Shower (Model Xst5038 Bf .5 Curbless)
The Easy Living 48 Inch Shower, model XST5038 BF .5 CURBLESS, is a one-piece gel-coat shower with built-in seat and grab bar designed for use by individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A half-inch steel reinforced threshold is standard. This model also offers a four-inch tile finish with diamond accents, a textured slip-resistant floor, a double wall leg ledge, and soap/shampoo ledges. The half-inch tri-cell
Easy Living 60 Inch Shower (Model Xss 6032 Sh 4.0)
The Easy Living 60 Inch Shower, model XSS 6032 SH 4.0, is a one piece gel-coat shower with built-in seat and grab bar designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a low four-inch step-over dam, a six- inch tile finish with diamond accents, a textured slip-resistant floor, a tall bench seat, and seat-height soap/s
Easy Living 60 Inch Shower (Model Xst 6033 Sh 4.0)
The Easy Living 60 Inch Shower, model XST 6033 SH 4.0, is a one- piece gel-coat 60 inch shower with a built-in seat and grab bar designed for use in assisted living, nursing home and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. This model offers a four-inch low step-over dam, a six-inch tile finish with diamond accents, a textured slip-resistant floor, and seat-height soap/shampoo ledg
Easy Living 60 Inch Shower (Model Xst 6038 Bf 2.0)
The Easy Living 60 Inch Shower, model XST 6038 BF 2.0, is a one- piece gel-coat roll-in shower designed for use in assisted living, nursing home, and healthcare facilities serving individuals with lower extremity disabilities. Steel plate reinforcements are standard for thermoplastic over steel grab bars. A two-inch curbless threshold is standard. This model offers a six- inch tile finish with diamond accents, a textured slip resistant floor, and soap/shampoo ledges. The half-inch tri-cell wall
Economy Shower Chair With Perforated Seat
The Economy Shower Chair With Perforated Seat is designed for use by individuals with balance or mobility disabilities. The shower chair provides wheeled access to the shower or commode. It is made with Healthcare grade PVC that does not rust, chip, stain or corrode. The shower chair and the seat are stable, easy to clean and made with comfort and safety for the occupant. It has a removable back made of durable, vinyl-coated polyester mesh and 3-inch locking casters.
Economy Shower Stall (Model Ess-1)
The Economy Shower Stall, model ESS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed, and it can be used for showering or as a privacy enclosure for a commode. The stall features replaceable vinyl shower curtains on all four sides for privacy. Other standard features include a shower unit with an electric pump for dispensing water fo
Endurant Receptor Ramp
The Endurant Receptor Ramp is a shower ramp designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. The ramp offers a transition between the floor and a BioPrism shower base receptor (sold separately). The ramp has a non-skid, textured surface which helps prevent slips and falls. It is manufactured from a solid pour of BioPrism solid surface. DIMENSIONS (WxL): 12 inches wide; up to 72 inches long
Ez-Shower
The EZ-SHOWER is a portable shower designed for use with individuals with mobility disabilities or who cannot leave the bed. Made of mildew-resistant vinyl, the EZ-SHOWER hangs on a bed post or IV pole by the wooden carrying handle or nylon cord and holds 2.5 gallons of water. An easy-fill spout prevents splashing snd snaps shut for watertight seal. The included flexible 4-foot hose has an on/off valve for easy water control. WARRANTY: 1-year limited warranty.
Fawssit Foldaway Wheelchair Shower (Models S2000, Ss4040, R3000, T4000, & B5000)
The FAWSsit Foldaway Wheelchair Shower is a portable shower designed for use by individuals who use wheelchairs. This self-contained portable shower stall can be used anywhere there is access to warm water, a drain and an electric outlet. The unit comes completely assembled and no tools are required for set up. The unit has a nylon mesh embedded double-layer vinyl drain pan. The custom design allows for maximum water removal and Velcro strips to hold sides in place. The front folds down for whee
Fixed Position Shower Seat (Models 712 & 712H)
Corner mounted shower seat of 16 gauge stainless steel, satin finish. Overall dimensions are 15 1/2 inches by 15 1/2 inches by 22 inches with 1 inch lip. Seat height determined by wall mounting. Model 712h ($188.95) is hinged.
Foldable Shower Seat (Model 9404)
The Foldable Shower Seat, model 9404, is a shower seat designed to mount directly to the wall of the shower for use by individuals with lower extremity, mobility, and balance disabilities who have difficulty standing in the shower. The seat folds down against the wall when not in use. The seat has a horseshoe design for hygiene. DIMENSIONS: The seat height can be adjusted from 20 inches to 23 inches and is 16 inches x 16 inches. When folded the seat is 5 inches wide. CAPACITY: The weight capac
Folding Seat (Model 8210)
Folding shower seat with stainless steel frame and naugahyde seat. Mounted on 3/8 inch marine plywood base, projection 23 inches, overall size 32 by 20 inches. Folds up against the wall.
Folding Shower Chair
The Folding Shower Chair is a folding shower seat designed for use by individuals with mobility or balance disabilities. This height-adjustable chair has an epoxy polyester lacquered steel frame and an injection-molded polypropene seat and back with an embosed anti-slip pattern. The seat can be inclined forward to assist people with limited joint mobility in the knees and hips and can be ordered with or without a recessed cutout for personal hygiene. Height adjustment is accomplished by means of
Folding Shower Seat (Models 956 & 9561)
The Folding Shower Seat ##956 and ##9561, is a wall mounted shower seat designed for public facilities that folds up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The Wall bracket is made of 16 gauge stainless steel with piano hinges. The retaining bracket is 11 gauge stainless steel with a positive bullet-type catch designed to hold the seat securely in an up or down position. The seat is blow-molded polyethylene that will not ret
Folding Shower Seat (Models B-517 & B-518 )
The Folding Shower Seat, models B-517 and B-518, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is L-shaped and is foam-padded, water-resistant naugahyde seat with an enclosed plywood base. DIMENSIONS: Seat is 32.875 inches wide and 1.5 inches thick; when extended, it projects 22.6875 inches from the wall. CAPA
Folding Shower Seat (Models B-5181 & B-5191)
The Folding Shower Seat, models B-5181 and B-5191, is a wall-mounted folding shower seat designed for use by people with balance, lower extremity or mobility disabilities. It has a stainless steel tubular frame and mounting brackets, and it features a self-locking mechanism. The seat is available in an L-shape (model B-5181) or rectangular shape (B-5191). The seat is constructed of durable, water-resistant solid phenolic with slats for drainage. DIMENSIONS: Seat is 33 inches (model B-5181) or 18
Folding Teakwood Shower Seat (Model 9559)
The Folding Teakwood Shower Seat ##9559 is designed to be wall mounted in the shower and to fold up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The seat is made of 3 handrubbed teakwood slats with rounded edges. The wall bracket is made of 16 gauge stainless steel with piano hinges, and the retaining bracket is 11 gauge stainless steel with positive, bullet-type catch to hold the seat securely in an up or down position. MOUNTING:
Franklin Brass Shower Seat With Phenolic Slats (Model 5404Lh & 5404Rh)
The Franklin Brass Shower Seat with Phenolic Slats is a folding shower seat designed for use by individuals with balance or lower extremity disabilities or arthritis. This seat is made of solid phenolic resin with laminated wood grain, 14-gauge stainless steel tubing, and 12-gauge stainless steel mounting brackets. The seat folds up against the wall when not in use, and is available in left-hand (mode l5404LH) or right- hand (model 5404RH) configuration. DIMENSIONS: The mounting heightis 19 inch
Freewill Barrier-Free Transfer Shower Module (Models K-12100 & K-12101)
The Freewill Barrier-Free Transfer Shower Module is an accessible roll-in shower module with built-in seat and grab bars, designed for use by individuals with mobility disabilities or spinal cord injury. This one-piece acrylic shower stall has an integral soap ledge, brushed or polished stainless steel grab bars, a fold-up seat on left (model K-12101) or right (model K-12100), molded-in floor pattern, and pit installation option. DIMENSIONS (HxLxD): 84 x 45 x 37.25 inches. Inside dimensions are
Gelcoat Special Care Unit (Model Sc4883)
Shower with built in grab bar, adjustable soap-dish and rear corner seat. Seat: 16 by 16 inches, 18 inches off shower floor. Outside dimensions: 48 inches wide by 36 inches deep by 78 inches high. Door size 66 7/8 by 43 7/8 inches. Weight approximately 140 pounds. Fabricated of molded fiberglass. One 18 inch straight stainless steel grab bar mounts vertically on valve wall 31 inches above floor bottom. One 16 inch by 24 inch L shaped grab bar mounts on back wall with long leg installed verticall
Handicapped Model Shower Cabinet.
Shower cabinet is 40 inches wide, 40 inches deep and 82 inches high. It is finished in either baked enamel or stainless steel, and features double wall construction and fibercore insulation. The pressure balanced shower valve is equipped with separate adjustable temperature limit stops. The unit also features a hand-held shower head with swivel fitting , 69 inch flexible brass hose, stainless steel curtain rod and approved curtain, a folding shower seat with a stainless steel frame, and one hori
Handicapped Shower
The Handicapped Shower is a roll-in shower designed for use by individuals who use wheelchairs. This wheelchair-accessible shower has a molded, removable incline ramp that clips into the shower base, and a removable rubber threshold that folds down when a wheelchair crosses over it, then pops up again to hold the water inside the shower. Other features include a built-in, wall-mounted, padded fold-up seat with a heavy-duty stainless steel frame; a single-handle water faucet with an anti-scald va
Hinged Corner Shower Seat (Model 954) & Fixed Corner Shower Seat (Model 9541)
The Hinged Corner Shower Seat ##954 is a folding shower seat that is hinged on one wall, and folds down for use. The seat is made of 16 gauge stainless steel. Joints are 3/4 inch channel formed return edges, corners are Heliarc welded and ground smooth for maximum rigidity and safety, and it has a piano hinge. The support angle and the retaining clip are made of stainless steel. The Fixed Corner Shower Seat ##9541 has the same dimensions and specifications as the Hinged Corner Shower Seat, but d
Hy-Gina Care Personal Portable Shower (Models 1000 & 2000)
Hy-Gina Care is a portable shower designed to enable caregivers and people with physical disabilities to perform personal bathing, hygiene, and shampooing tasks. Constructed of heavy-duty polyester resins and fiberglass compunds, this cabinet-style shower features side or front entry, an attached transfer seat with support legs, and a built-in hydro-powered seat with one-touch controls. Showering nozzles are placed to provide total body water coverage in a criss-cross pattern and a hand-held sha
Independence Line 1-Piece Transfer Shower
The Independence Line 1-Piece Transfer Shower, model MP3837BF, is an accessible shower stall designed for use by individuals with mobility or balance disabilities. This fiberglass-reinforced gelcoat shower has a built-in corner seat, grab bars, a flexible hose shower head, and a slip-resistant, textured floor with a center drain. OPTIONS: Dome (model IN38). DIMENSIONS (HxDxW): 78.25 x 38 x 38 inches. The unit has an ADA-compliant 2-inch threshold if it is installed in a 1.5-inch recess. COLOR: W
Inspire Walk-In Shower
The Inspire Walk-In Shower is an accessible roll in shower stall designed for use by individuals with mobility disabilities, including wheelchair users and individuals with arthritis. The shower entrance has bi-fold shower doors that open a full 180 degrees to provide barrier-free access across the entire width of the shower. The shower doors are comprised of a single full height tempered glass panel coupled with two half-height panels. All panels feature tempered raindrop patterns. This accessi
Invisia Serenaseat
The Invisia SerenaSeat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. This seat has a Brazilian walnut seat and back and an aluminum frame. Brazilian Walnut is naturally resistant to moisture, mildew and decay. The removable backrest conceals the screws of the mounting brackets. The seat folds up when not in use. DIMENSIONS: Folded, the seat has a 3-inch profile. Open, the seat is 18 x 15 x 15 inches. The mounting br
Kohler Freewill Barrier-Free Bath And Shower Module (Models K-12103 & K-12104)
The Kohler Freewill Barrier-Free Bath and Shower Module, models K-12103 and K-12104, is a shower bathtub designed for use by people with physical disabilities. The unit includes slip-resistant floors, and a lift-out transfer seat. It is available with either a left or right side drain. The module is made of acrylic and comes with grab bars made of either brushed stainless steel, polished stainless steel, or nylon. COLOR: White, almond, sunlight yellow, ice grey, biscuit, cashmere, sandbar, or te
Laguna Walk-In Bathtub
The Laguna Walk-In Bathtub is an accessible bathtub designed for use by individuals with balance or mobility disabilities or arthritis. This extra-large walk in tub has a wide door with left or right hinges, a low doorway entry level, a contoured seat and back rest, and thermostatically controlled water temperature. OPTIONS: Lever, cross head, or contemporary style faucets; bathtub hand grips; hydrotherapy spa system; shower option; and shower canopy for the hanging of shower curtains. DIMENSION
Liteshower Recliner Model
The LiteShower Recliner Model is a portable accessible shower stall designed for use by individuals with mobility or severe physical disabilities. The unit consists of a shower tray with collapsible walls to facilitate roll-in access; a folding screen and curtains that close around the sides; a handheld showerhead on a 7-foot hose that connects to a faucet; and a pump for draining the tray after the shower. The tray is placed on the floor near a faucet and a sink or toilet. The user reclines on
Liteshower Shower-In-Bed Model
The LiteShower Shower-in-Bed Model is a bed shower designed for use by individuals with mobility or severe physical disabilities. It allows a person to remain in bed during a shower. The unit includes a shower tray with collapsible walls for easy access, which is placed on top of the bed; a handheld shower head with a 7-foot hose that connects to a shower or faucet; and a waste water disposal pump. The user showers with a handshower connected to a faucet. After the shower, an electric pump drai
Liteshower Standard Model
The LiteShower Standard Model is a portable shower stall that is accessible to wheelchair users and other individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The unit's shower tray is placed on the floor,
Liteshower Tall Model
LiteShower Tall Model is a portable accessible shower stall designed for use by individuals with mobility disabilities. It consists of four components: a handheld shower head with a 7-foot hose that connects to a shower or faucet; a tray large enough to fit a wheelchair and occupant with collapsible walls for roll-in access; a free-standing screen that surrounds the shower on all four sides; and a waste water disposal pump. The user stands to shower in this portable stall, which also can be ente
Mullen Shower Base Bathtub Replacement
Mullen Shower bases are roll-in showers designed for use by individuals who use wheelchairs or who have walking or lower extremity disabilities. These bases can be installed with vinyl or tile floors and feature a clamping system on two access sides that secures the base to the vinyl floor covering or the tile floor adapter to prevent leakage. Built-in tile upstands on the other two sides contribute to the integrity of the water seals. The ribbed underside enables the unit to key into the floori
Option E Shower Door
The Option E Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option E doors are for use with showers located in a corner with two walls and two sides open with a threshold to contain water. DIMENSION
Option Ew Shower Doors
The Option EW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option EW doors are for use with showers located in a corner with two walls and two sides open with no threshold to contain water. The sy
Option N Shower Doors
The Option N Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option N doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.
Option Nw Shower Doors
The Option NW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option NW door system is for use with showers located in an alcove with walls on three sides and one side open with no threshold to conta
Option T Shower Doors
The Option T Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option T doors are for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain water.
Option Tw Shower Doors
The Option TW Shower Doors are shower doors designed for people with mobility disabilities or who cannot stand in the shower and require assistance when showering. They are intended to provide easy access to a spouse, nurse or caregivers so that they can reach over the doors to assist the person taking the shower while keeping water within the shower area. The Option TW door system is for use with showers located in an alcove with walls on three sides and one side open and a threshold to contain
Outlook Series Ada Compliant Shower (Models Bfs-36F, Bfs-48F, Bfs-6036F, & Bfs-60F)
The Outlook Series ADA Compliant Shower is a roll-in shower designed for use by individuals who use wheelchairs. This unit comes as a base model with a choice of Americans with Disabilities Act-compliant options. The integrated fiberglass base has an interior and exterior half-beveled edge, front flange, and wheelchair-accessible threshold. OPTIONS: Straight grab bar with textured finish; curtain rod with plastic end caps; chrome fixtures; solid brass drain; large L-shaped or rectangular seat. D
Outlook Series Barrier Free Tub Shower (Model Bfts-60F)
The Outlook Series Barrier Free Tub Shower, model BFTS-60F, is a shower bathtub designed for use by individuals with mobility disabilities. The two-piece tub shower base has a textured bottom with a left- or right-hand drain. The maximum water capacity of the tub is 39.6 gallons. OPTIONS: Homestead whirlpool system with air switch; Naugahyde or Phenolic rectangular fold-up or drop-in seat; straight grab bar; curtain rod with plastic end caps; and vinyl shower curtain with stainless steel hooks.
Padded Folding Shower Bench (Model Apm4210P)
The Padded Folding Shower Bench is a wall- mounted folding shower seat designed for use by individuals with balance, mobility, neurological, or lower extremity disabilities. This shower seat is hinged on the wall and folds down for use. Features include two stainless steel tubular legs for support and a wide, padded seat. DIMENSIONS: The seat is 23 inches wide and the minimum base width is 32.25 inches CAPACITY: 558 pounds. COLOR: Grey.
Ponte Giulio Tubocolor Abs Folding Shower Seat
Ponte Giulio Tubocolor ABS Folding Shower Seat is a wall-mounted folding shower seat designed for use by individuals with balance, mobility, or lower extremity disabilities. Made of ABS plastic, this seat has drainage slots and folds up against the wall when not in use. This seat also has an extended ABS base made of seamless zinc-plated steel pipe and coated with bio-compatible, warm-to-the-touch vinyl. DIMENSIONS (WxD): The seat is 13 x 12 5/8 inches. The unit is 16 15/16 x 16 15/16 inches ov
Refresh Walk-In Shower
The Refresh Walk-in Shower is a roll in shower stall with built-in grab bars and seat designed to be accessible to wheelchair users and individuals with lower extremity or mobility disabilities or spinal cord injury. This low-entry shower has bi-fold shower doors that open 180 degrees, providing barrier-free access across the width of the shower. The half-height folding doors have tempered raindrop pattern panels that cover the shower opening when closed yet provide full access to the shower whe
Replacement Shower Seat
CUSTOM ADAPTATION PURPOSE: To enable an individual with spina bifida to shower independently. An existing shower seat had been custom built and mounted to the side wall of the shower at a slight angle to promote damage. The unit had a wooden seat covered with plastic, but over time water had penetrated the wood, causing it to rot and eventually break. A new seat base was made from 12 millimeter high-density polyethylene with rounded corners. Glued to the base was a sheet of closed-cell foam to
Retractable Shower Seat (Models 703 & 703T)
Wall mounted stainless steel shower seat with tubular frame, 2 legs angle into wall for rigid support. When seat is retracted, legs fold against wall. Teakwood seats or Naugahyde covered foam cushion. Seat dimensions are 14 inches by 16 inches. Seat height is 19 inches.
Roll In Shower In Existing Tub Space.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides waterproof pan on floor with minimal lip to impede wheelchair or person walking. Modification procedure: 1) Remove existing bathtub. 2) Paint floor with a concrete adhesive. 3) Form wire cloth frame on floor and 4 inches up on side walls and attach to threshold. 4) Form studwall (36 inches) and 1 by 6 inch maple threshold 36 inches wide at the door. 5) Pour concrete patch base over wire cloth, shaping it for form and drainage considerations (4
Safe Step Walk-In Shower
The Safe Step Walk-In Shower is an accessible shower stall with built-in seat and grab bar designed for use by individuals with balance, lower extremity or mobility disabilities. This shower has a 4-inch entry step and a built-in folding safety chair with armrests. Both the seat and armrests have extra thick pads. The Safe Step Walk-In Shower features a built-in vertical safety grab bar adjacent to the seat; extra thick, commercial grade anti-slip safety flooring; Delta dual showers, including a
Safer Shower Experience
The Safer Shower Experience is a roll-in shower designed for use by individuals who use wheelchairs. It has a flexible water barrier and removable rubber ramp that allow a wheelchair to roll directly into the shower stall, where the user can transfer to the drop-down, fold-away bench. Other features include multiple shower settings, two shower heads (hand-held and stationary), four grab bars, chrome hardware, temperature safety valves, and a cushioned drop-down seat.
Safeshower Transitions
SafeShower Transitions are shower ramps designed to make shower stalls accessible to individuals with mobility or lower extremity disabilities or spinal cord injury and others who use wheelchairs. These ramps can be installed with silicone adhesive for a permanent application or with double-back tape for less permanent applications. They have a slip resistant surface and are made of composite plastic that is not absorbent. SafeShower transitions come with a built-in side approach, or they can be
Serpentine Handicapped Shower Floor.
Black and white terrazzo shower floor is designed with 1/2 inch threshold for wheelchair accessibility. Floor is 40 inches wide and 40 inches deep. Meets California requirements. Cal. Title 24, Part 2-2- 1711 and ANSI Standard A-117.1-1980. .
Shower Access Platform
CUSTOM ADAPTATION PURPOSE: To provide access to a shower stall for an individual with mobility disabilities. The shower of the home was too small to allow a shower chair to be maneuvered and the base of the shower was recessed into the floor, making it difficult to pull the chair out of the shower. The solution was to develop a platform or false floor made of marine plywood. The platform was square with one corner cut out to fit around a small ledge in the shower. The plywood was treated with a
Shower Anywhere (Models Sa-1, Sc-1, Sch-1, Ss-1, & Ss-2)
Shower Anywhere is a portable shower designed for use by individuals with mobility or severe physical disabilities. This system, models SA-1, SC-1, and SCH-1, consists of a plastic tank, a three-ply braided shower hose that stores in an annular groove in the tank when not in use, and a shower head with a fingertip flow control valve and a water conservation switch. Within the tank are an electric pump and a rechargeable batttery (where applicable). An accessory compartment in the tank stores a p
Shower Anywhere Stall (Model Shs-1)
The Shower Anywhere Stall, model SHS-1, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a left- or right-hand mounted tilt-up transfer seat. The system includes the free-standing aluminum frame enclosure with shower curtains on three sides; a Shower Anywhere unit, model SA-1 (see entry); and a waste water reclaimin
Shower Anywhere Stall (Model Shs-2)
The Shower Anywhere Stall, model SHS-2, is a portable shower designed for use by individuals who cannot access a conventional bathroom. The stall requires no permanent installation or electrical or water connections, enabling it to be moved as needed. This stall features a swivel bench that rotates a full 90 degrees, enabling the user to sit or be placed on the bench outside the enclosure and then be rotated into the stall. An adjustable backrest with a chest belt and a lap belt aid in positioni
Shower Cabinet
Shower cabinet with sliding seat. Lock in front or rear position. Standard toilet seat, can be ordered with bedpan holder. Front has slots for splash guard door which must be removed to enter. Control panel has shower hose and thermostat. Optional shampoo basin.
Shower Cabinet (Model Ms 348)
The MS 348 is a 1-piece shower with a built-in corner seat. It features a textured floor with rounded corners, built-in soap dish, and pre-drilled openings for drain and overflow connections. The shower is made of fiberglass and thermoformed acrylic with resin backing. Valves can be located on either the left or right hand side. Shower value and head not included. DIMENSIONS: Overall measurements (WxDxH) are 48 x 34 x 84 inches; the ledge at the entrance is approximately 5 inches high; the entra
Shower Platform
The Shower Platform is an elevated shower platform designed for use by people with lower extremity and mobility disabilities, spinal cord industry and others who regularly use a wheelchair. The platform raises the floor of a shower to accommodate a wheelchair that must enter the shower using a ramp. It is designed to be used with a PVI Threshold Ramp (see separate entry), which is sold separately. Each platform is custom built to fit an existing shower basin; however, it is only available in a r
Shower Seat
The Shower Seat is a folding shower seat designed for use by individuals with balance, lower extremity, or mobility disabilities, arthritis, or spinal cord injury. This single-piece, wall-mounted seat has swing-down legs and is available with a phenolic, HDPE, or padded seat surface. DIMENSIONS (HxLxD): 18 x 22 x 16 inches. CAPACITY: 500 pounds.
Shower Seat For Wheelchair Transfer (Models 710A & 710T)
Wall mounted stainless steel shower seat with tubular frame, folds flat against wall. L shape to provide easy transfer. Teakwood or Naugahyde covered 2 inch foam cushion over plywood base. Seat dimensions are 32 inches by 20 inches by 13 inches. Seat height is determined by wall mounting. Right or left available.
Shower Stall (Model Shr-1)
The Shower Stall, model SHR-1, is a portable shower enclosure designed for use by individuals with mobility disabilities. The unit can be used as a shelter while showering outdoors or to enclose a portable toilet. Large enough for two users, this enclosure features front and rear openings that extend the full length of the curtains and can be closed and secured with the attached quick-release fasteners. Made of heavy-duty mildew-resistant vinyl, the curtains are attached to support bars at the t
Showertub (Model 3060)
The ShowerTub, model 3060, is a shower bathtub designed for use by individuals with walking or balance disabilities or arthritis. This single-threshold step-in shower repalces a standard five-foot bathtub and has a choice of a right- or left-handed drain. This shower features one-piece molded fiberglass construction with a slip-resistant floor and semigloss finish that resists mold, mildew and stains. OPTIONS: Stainless steel grab bar and a pull-down, wall-mounted shower seat. DIMENSIONS (LxW):
Smart Shower
The Smart Shower is designed to enable individuals to shower independently with the use of only one hand. The device ensures safety, remaining stable in a fixed position with the help of an antilock system.
Spa Shell
Bathing system. Shell of bathing unit rotates from vertical position to horizontal position. In vertical position the user sits on, or transfers to, the built in seat. Full immersion bathing with complete coverage of legs. 65 gallon capacity. Ergonomically designed faucet valve fills tub. Control panel installable for user or attendant access. Built in thermostatic mixer with temperature gauge. Built in disinfection system automatically mixes water and disinfectant. Vacuum thermoformed, coextrud
Special Care Shower Unit (Model Sc6060)
Molded fiberglass shower stall accessible to wheelchairs. Fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Unit has a detachable 48 inch wide by 20 inch deep wheelchair accessible ramp, with an attached rubber mat for no-skid traction. An l8 inch wide stainless steel and teakwood fold-down seat is attached to the side wall. Five grab bars made of l 1/2 inch18 gauge stainless steel, attached with 3 by 3 inch metal mounting plates. Two 24 inc
Special Care Shower Unit (Models Sc4586Cs & Sc4186)
Molded reinforced shower units are fabricated of fiberglass over a cellular core and a reinforced polyester outer protective coating. Grab bars are made of 1 1/2 inch 18 gauge stainless steel, mounted with 3 by 3 inch metal mounting plates. SC4586CS has two grab bars: l6 inch straight grab bar is mounted at an angle on the back wall with the lower mounting 33 inches from the floor of the unit; 24 inch straight grab bar is mounted vertically on the valve wall with the bottom of the bar 42 inches
Special Care Tub And Shower Unit (Model Sc6083)
Molded reinforced fiberglass bathtub and shower unit is fabricated of fiberglass over a cellular inner core and a reinforced polyester outer protective coating. Equipped with four grab bars, secured from the rear with a 3 by 3 inch metal mounting plate. Two 32 inch straight grab bars are mounted horizontally on the flat back wall at heights of 21 and 29 inches from the tub floor. One 24 inch straight grab bar is mounted horizontally on the valve wall 29 inches above the tub floor, and a 12 inch
Special Needs Shower (Model Xst 6337 Bf 1.25Ww)
The Special Needs Shower, model XST 6337 BF 1.25 WW, is a controlled environment shower with built-in grab bar and seat designed for use with individuals with Alzheimer's Disease. The 24-inch wing wall design allows the toilet or vanity to be closer to the shower, creates a splash-free cove, and defines the space for user security. Controls are out of reach or completely outside of the shower on the wing wall. Contrasting color bars provide further definition and assist visual depth perception.
Special Needs Wheelchair Accessible Shower (Model 6236)
The Special Needs Wheelchair Accessible Shower, model 6236, is an accessible roll-in shower stall designed for use by individuals with mobility disabilities or spinal cord injury. The unit has a chip-resistant gelcoat finish reinforced with fibreglass, and comes with a left- or right-hand 18-gauge stainless steel grab bar. When installed as per installation instructions, the shower has a sloped threshold for wheelchair access, while retaining water within the shower. This shower also has a molde
Staydry Collapsible Water Dam
The StayDry Collapsible Water Dam is a flexible water dam for shower stalls designed for use by individuals with mobility or walking disabilities. This dam enables a wheelchair or a walker to transfer in or out of a shower without encountering a barrier as it collapses when rolled or walked upon. The water dam controls both the shower water and the shower curtain. The dam is installed by cutting to size using a pair of sissors. Apply by removing the paper covering the two strips of double sided
Super Grip Perma Handle
The Super Grip Perma Handle is a bathroom safety product designed to help with getting in and out of the bathtub/shower and to help prevent slips or falls. It is a textured handle, opposed to a Chrome, Vinyl, or Enamel Hand Bar. It is made for individuals with balance issues and/or any other disability that makes it difficult to step in or out of the bathtub or shower. It can be used by a person of any age and attaches to most surfaces. It screws in for a permanent hold and can be mounted vertic
Swanstone Barrier Free Folding Shower Seat (Model Bf-2300)
The Swanstone Barrier-Free Folding Shower Seat, model BF-2300, is a folding corner shower seat designed for use by individuals with balance or mobility disabilities. Two seat styles fit the back wall or either side wall (left or right). DIMENSIONS (DxW): 23 1/3 x 22.5 inches. CAPACITY: 250 pounds.
Transfer Shower Floor (Model 3739)
The Transfer Shower Floor, model 3739, is a roll-in shower floor designed for use by individuals with mobility, walking, or balance disabilities, spinal cord injury, or arthritis. This unit features features a modified threshold to retain water yet allow easy step-in or wheelchair access. The unit is made of molded fiberglass and features a ribbed underbody for extra strength and an integral center drain with seal and removable strainer. The slip-resistant surface resists mold and mildew and has
Transfer Shower Floor (Models Fts-3738 & Sts-3738)
The Transfer Shower Floor is a floor for an accessible shower stall for individuals with mobility disabilities. The floor is designed to allow transfers from a wheelchair to a shower seat (not included). The floor has a pebbled, slip-resistant surface. Because it is made from a reinforced solid surface, it has no grout to clean and does not mold or mildew. The color and texture run all the way through and cannot wear away. The floor is made of Veritek (model FTS-3738) or Swanstone (model STS-373
Trieste Shower Floor For The Handicapped (Model 98 Hc)
Roll in precast terrazzo shower floor, non slip, with integral graded entry ramp. Ramp slope is 1 inch by 12 inches with 1/2 inch front threshold. Center drain with removable stainless plate. Must be set in level grout or mortar bed. Composition: black and white marble chips cast in cement. Rustproof flange extends 1 inch above the outer edge. 60 inches by 60 inches.
Tuff-Form Shower Base Bathtub Replacement Size
The Tuff-Form Shower Base Bathtub Replacement is an accessible shower stall designed to replace standard bathtubs. Designed for barrier-free showering, this unit can be installed with either vinyl or ceramic tile floors and the pitch to drain is built-in. DIMENSIONS(LxW): 59 x 32.25 inches. CAPACITY: 419 pounds. WEIGHT: 48 pounds.
Universal Design Shower Floor (Models Fbf-3060L/r & Sbf-3060L/r)
The Universal Design Shower Floor, models FBF-3060L/R and SBF-3060L/R, is a roll-in shower floor designed for use by individuals who use wheelchairs. The floor has a pebbled, slip-resistant surface. It is available with a left- or right-hand drain and can be recessed for flush mounting or used with a ramp (not included). The floor is made of Veritek, a reinforced solid surface (model FBF-3060L/R) or from Swanstone solid surface (model SBF-3060L/R). Reinforced solid surface means color and textur
Vitalize Walk-In Shower
The Vitalize Walk-In Shower is an accessible shower stall with fold-down seat designed for use by individuals with lower extremity or mobility disabilities, including arthritis. This barrier-free, low entry shower has a three panel entrance, with one fixed panel and two sliding panels that open to provide barrier-free access across 2/3 of the width of the shower. The door frames are trackless at the bottom providing a smooth and safe low threshold shower entry. The panels feature Aquatex designs
Walk In Tub / Shower Combination (Model Rn5)
The Walk In Tub / Shower Combination, model RN5. is an accessible shower bathtub designed for use by individuals with balance or lower extremity disabilities or arthritis. This tub and shower combination system enables full standing showering or sitting on the built-in seat. The side door allows for low entry into a full-sized tub. OPTIONS: Surround wall. DIMENSIONS (LxW): 60 x 30 inches. COLOR: White.
Wall-Mounted Shower Stool
The Wall-Mounted Shower Stool is designed for use by individuals with balance or mobility disabilities. Attached to the wall, this unit folds against the wall when not in use. When pulled down for use, front supporting legs automatically drop into position. A positioning screw permits fine adjustment for use on sloping floors. Available with a solid seat or with a recessed opening to facilitate personal hygiene, the seat has an embossed surface that pushes water and soap solution away from the u
Water Glow Color LED Light Shower Head
Water Glow Color LED Light Shower Head is an innovative safety device designed for young children and individuals with multiple sclerosis and the aging population. It visually alerts users the temperature of their shower. By simply twisting off the existing showerhead and replacing it with this Water Glow LED Shower Head, users can easily judge the best time to enter the shower depending on the color. With three multi-color transitions, the shower head alerts users that the water is freezing w
Waterstopper
The WaterStopper is a water dam for shower designed for use by individuals with mobility disabilities. This dam prevents wet floors outside a roll in shower while allowing the user to enter the shower in a wheelchair. The T-shaped dam is self-adhesive and sticks to a clean shower floor without epoxy or rubber adhesive. The three-piece kit includes two molded rubber end caps that fit showers from Best Bath Systems but can be used universally to match an existing shower. The kit also includes alco
Wheelchair Accessible Shower Threshold (Model 8452A)
The Wheelchair Accessible Shower Threshold, model 8452A, is a shower threshold ramp designed for use in wheelchair-accessible showers. The solid neoprene gasket keeps water in while allowing wheels to pass over by compressing the neoprene. DIMENSIONS (HxW): 1.25 x 1.75 inches; height is reduced to 0.278 inches when compressed by wheels.
Zoe Dolphin Vl Shower System
Zoe Dolphin Vll Shower System is a showerhead on an adjustable bar and a handheld showerhead, designed for use by individuals with mobility disabilities. The system allows the user to shower with the showerhead on its adjustable slide bar or with the handheld showerhead or both at the same time. The system includes a four-position shower head on a shower slide bar, and a four-position handheld shower head on a hose. Also included are a wall supply elbow, a vacuum breaker, and a Moentrol shower
Zoe Folding Handicap Shower Seat (Model 410281)
The Zoe Folding Handicap Shower Seat, model 410281, is a folding shower seat designed for use by individuals with mobility, balance, or lower extremity disabilities or arthritis. The seat is anchored to the shower wall and folds up when not in use. It is constructed of stainless steel with a phenolic slatted seat. CAPACITY: 300 pounds.
Zoe Mariner Ll Pressure Balancing Shower Faucet System
The Zoe Mariner ll Pressure Balancing Shower Faucet System is a lever-handle shower faucet with a showerhead on an adjustable bar and a handshower on a flexible hose, designed for use by individuals with mobility disabilities. The system has a pressure-balancing valve to prevent scalding. The Showerhead and handheld body shower both have four spray settings. A diverter valve controls water from shower head to handheld sprayer. Fixtures are made of brass. A soap tray is also included. DIMENSIONS:
Zoe Sterling Roll-In Wheelchair Shower Stall (Model 6202)
The Zoe Sterling Roll-In Wheelchair Shower Stall, model 6202, is an accessible shower designed for use by individuals in wheelchairs. The stall includes a base, two end walls, and a back wall. The back wall has built-in shelving and a towel bar. The stall is made of solid Vikrell material with color molded throughout and a lightly textured swirl-gloss finish. The bottom of the stall is lightly pebbled for better traction and safer footing. DIMENSIONS (HxDxW): 72 x 36 x 34 inches. COLOR: Almond o